Grace Fabrication Plates

History of "The Grace Plates"
The Grace Plate – like most inventions, was brought about by necessity. In our central fabrication, we used the industry's standard 4-hole square plate that was available, but you had to make sure the plate was exactly square with the socket, before lamination. We had the idea, that if the plate was round, we could align the plate after the socket was fabricated, by drilling the 4-holes as a final step, when you could see inside the socket.
Therefore, the Grace Plate was created. Since then, thousands of Grace Plates have been used in products across the world. The name “Grace Plate” has become synonymous with practically all 4-hole plates, but there is only one original. The actual name “Grace” comes from our family name and Grace Prosthetic Fabrication, Inc. The Grace Plate has evolved into over a dozen different variations for different applications.
Grace Plates - 225lb Weight Limit
1210 Original Grace Plate
Part #1210* Torque 12nm / 9ft per lb
* Weight Limit 225lbs
Click "Go to Link" for 1210 Fabrication instructions
1210-BD Grace Lock
Part #1210-BD* Torque 12nm / 9ft per lb
* Weight Limit 225lbs
Click "Go to Link for 1210-FL / 1210-FD Fabrication instructions
Grace Plates - 300lb Weight Limit
1210-L Lanyard Strap Kit
Part #1210-LIncludes:
* 2 straps
* Lanyard plate
* 1934 Spacer plate
* Screws
* 2 Bolts
* Torque 12nm / 9ft per lb
* Weight Limit 300lbs
1210-S Tie-In Single Bore w/Notches
Part #1210-S* Torque 12nm / 9ft per lb
* Weight Limit 300lbs
Click "Go to Link for 1210-S/1210-S1 Fabrication instructions
1210-S1 Tie-in Double Bore w/ Notch
Part #1210-S1* Torque 12nm / 9ft per lb
* Weight Limit 300lbs
Click "Go to Link for 1210-S/1210-S1 Fabrication instructions
1210-S2 Suction Plate
Part #1210-S2* Torque 12nm / 9ft per lb
* Weight Limit 300lbs
* Pairs with 1210-S2V Suction Valve- Sold separately